How to Make Your Own Dog Mask – The Basics

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Be sure the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And dog air filter mask attach the other area of the mask on the dog. Be sure that the ears are level and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you’ll have to do some sanding to be certain it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.